View SGM8621-15_8407534.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

sgm8621/2/3/4 250 a, 3mhz, rail-to-rail i/o cmos operational amplifiers product description the sgm8621 (single), sgm8622 (dual), sgm8623 (single with shutdown) and sgm8624 (quad) are low noise, low voltage, and low power operational amplifiers, that can be designed into a wide range of applications. the sgm8621/2/3/4 have a high gain-bandwidth product of 3mhz, a slew rate of 1.7v/ s, and a quiescent current of 250 a/amplifier at 5v. the sgm8623 has a power-down disable feature that reduces the supply current to 150na. the sgm8621/2/3/4 are designed to provide optimal performance in low voltage and low noise systems. they provide rail-to-rail output sw ing into heavy loads. the input common mode voltage range includes ground, and the maximum input offset voltage is 3mv for sgm8621/2/3/4. they are specified over the extended industrial temperature range (-40 to +125 ). the operating range is from 2.5v to 5.5v. the single version, sgm8621/8623, is available in green sc70-5, soic-8 and sot-23-5(6) packages. the dual version sgm8622 is available in green soic-8 and msop-8 packages. the quad version sgm8624 is available in green soic-14 and tssop-14 packages. applications sensors audio active filters a/d converters communications test equipment cellular and cordless phones laptops and pdas photodiode amplification battery-powered instrumentation features ? low cost ? rail-to-rail input and output 0.7mv typical v os ? high gain-bandwidth product: 3mhz ? high slew rate: 1.7v/ s ? settling time to 0.1% with 2v step: 2.1 s ? overload recovery time: 1 s ? low noise: 12nv/ hz ? supply voltage range: 2.5v to 5.5v ? input voltage range: -0.1v to +5.6v with v s = 5.5v ? low supply current 250 a/amplifier (typ) 150na shutdown current for sgm8623 ? small packaging sgm8621 available in sc70-5, sot-23-5 and soic-8 sgm8622 available in msop-8 and soic-8 sgm8623 available in sot-23-6 and soic-8 sgm8624 available in tssop-14 and soic-14 pin configurations (top view) +v s -in 3 4 5 1 2 out -v s +in sgm8621 sot-23-5 /sc70-5 out 3 4 5 6 1 2 -v s +in +v s disable -in 8623 sot-23-6 sgm8623 out b +v s +in b out a 5 6 7 8 1 2 3 4 -in a +in a -v s -in b sgm8622 soic-8 / msop-8 (sgm8623 only) -in +in -v s nc 5 6 7 8 1 2 3 4 +v s sgm8621/8623 soic-8 nc out disable nc = no connect 10 11 12 13 14 1 2 3 4 5 out a -in a +in a -v s +v s -in d +in d sgm8624 tssop-14 / soic-14 6 7 9 8 -in b +in b -in c out b out c +in c out d rev. b. 3 sg micro corp www.sg-micro.com
250 a, 3mhz, rail-to-rail i/o cmos operational amplifiers 2 sgm8621/2 / 3/4 sg micro corp www.sg-micro.com package/ordering information model order number package description package option marking information sgm8621xc5/tr sc70-5 tape and reel, 3000 8621 sgm8621xn5/tr sot-23-5 tape and reel, 3000 8621 sgm8621 sgm8621xs/tr soic-8 tape and reel, 2500 sgm8621xs sgm8622xms/tr msop-8 tape and reel, 3000 sgm8622xms sgm8622 sgm8622xs/tr soic-8 tape and reel, 2500 sgm8622xs sgm8623xn6/tr sot-23-6 tape and reel, 3000 8623 sgm8623 sgm8623xs/tr soic-8 tape and reel, 2500 sgm8623xs sgm8624xs14/tr soic-14 tape and reel, 2500 sgm8624xs14 sgm8624 sgm8624xts14/tr tssop-14 tape and reel, 3000 sgm8624xts14 absolute maximum ratings supply voltage, +v s to -v s ................................................. 7.5v common mode input voltage.??. (-v s ) - 0.5v to (+v s ) + 0.5v storage temperature range.............................-65 to +150 junction temperature.......................................................160 operating temperature rang e............. ............-55 to +150 package thermal resistance @ t a = +25 sc70-5, ja ................................................................ 333 /w sot-23-5, ja .............................................................. 190 /w sot-23-6, ja .............................................................. 190 /w soic-8, ja ....................................................................125 /w msop-8, ja ................ ............... .................... .............. 216 /w lead temperature (soldering 10sec) ???????????.????????....................260 esd susceptibility hbm.................................................................................1500v mm.....................................................................................400v note: stresses beyond those listed under ?absolute maximum ratings? may cause permanent damage to the device. these are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. exposure to absolute maxi mum rating conditions for extended periods may affect device rel iability. caution this integrated circuit can be damaged by esd if you don?t pay a ttention to esd protection. sgmicro recommends that all integra ted circuits be handled with appropriate precautions. failure to ob serve proper handling and installation procedures can cause dama ge. esd damage can range from subtle performance degradation to comp lete device failure. precision integrated circuits may be more susceptible to damage because very small parametric changes co uld cause the device not to meet its published specifications. sgmicro reserves the right to make any change in circuit design, specification or other related things if necessary without not ice at any time. please contact sgmicro sales office to get the latest datasheet.
250 a, 3mhz, rail-to-rail i/o cmos operational amplifiers 3 sgm8621/2/3/4 sg micro corp www.sg-micro.com electrical characteristics: v s = +5v (at t a = +25 , v cm = v s /2, r l = 600 ? , unless otherwise noted.) sgm8621/2/3/4 typ min/max over temperature parameter conditions +25 +25 0 to 70 -40 to 85 -40 to 125 units min/max input characteristics input offset voltage (v os ) input bias current (i b ) input offset current (i os ) input common mode voltage range (v cm ) common mode rejection ratio (cmrr) open-loop voltage gain (a ol ) input offset voltage drift ( v os / t ) v s = 5.5v v s = 5.5v, v cm = -0.1v to 4v v s = 5.5v, v cm = -0.1v to 5.6v r l = 600 ? , vo = 0.15v to 4.85v r l = 10k ? , vo = 0.05v to 4.95v 0.7 1 1 -0.1 to +5.6 90 92 100 110 2.7 3 75 66 92 100 3.1 74 65 90 99 3.3 73 65 89 98 3.5 73 64 78 82 mv pa pa v db db db db v/ max typ typ typ min min min min typ output characteristics output voltage swing from rail output current (i out ) closed-loop output impedance r l = 600 ? r l = 10k ? f = 100khz, g = +1 0.1 0.015 48 2.6 45 42 40 30 v v ma ? typ typ min typ power-down disable (sgm8623 only) turn-on time turn-off time disable voltage-off disable voltage-on 6.2 1.4 0.8 2 ns ns v v typ typ max min power supply operating voltage range power supply rejection ratio (psrr) quiescent current/amplifier (i q ) supply current when disabled (sgm8623 only) v s = +2.5v to +5.5v v cm = (-v s ) + 0.5v i out = 0 94 250 150 2.5 5.5 79 300 2.5 5.5 78 345 2.5 5.5 77 350 2.5 5.5 76 380 v v db a na min max min max max dynamic performance gain-bandwidth product (gbp) phase margin ( o ) full power bandwidth (bw p ) slew rate (sr) settling time to 0.1% (t s ) overload recovery time r l = 10k ? 1% distortion, r l = 600 ? g = +1, 2v step, r l = 10k ? g = +1, 2v step, r l = 600 ? v in gain = v s , r l = 600 ? 3 67 50 1.7 2.1 1 mhz degrees khz v/ s s s typ typ typ typ typ typ noise performance voltage noise density (e n ) current noise density (i n ) f = 1khz f = 1khz 12 3 nv/ hz fa/ hz typ typ
250 a, 3mhz, rail-to-rail i/o cmos operational amplifiers 4 sgm8621/2/3/4 sg micro corp www.sg-micro.com typical performance characteristics at t a = +25 , v cm = v s /2, r l = 600 ? , unless otherwise noted. closed-loop output voltage swing 0 1 2 3 4 5 6 10 100 1000 10000 frequency (khz) output voltage (v p-p ) v s = 5v v in = 4.9v p-p t a = 25 r l = 10k ? g = 1 output impedance vs. frequency 0 20 40 60 80 100 120 140 0.1 1 10 100 1000 10000 frequency (khz) output impedance ( ? ) v s = 5v g = 10 g = 1 g = 100 positive overload recovery negative overload recovery time (5 s/div) time (1 s/div) large-signal step response small-signal step response time (100 s/div) time (100 s/div) 0v 0v v s = 2.5v v in = 50mv r l = 620 ? g = 100 2.5v -50mv 0v 0v 2.5v -50mv v s = 2.5v v in = 50mv r l = 620 ? g = 100 v s = 5v g = +1 c l = 100pf r l = 620 ? v s = 5v g = +1 c l = 100pf r l = 620 ? voltage (1v/div) voltage (50mv/div)
250 a, 3mhz, rail-to-rail i/o cmos operational amplifiers 5 sgm8621/2/3/4 sg micro corp www.sg-micro.com typical performance characteristics at t a = +25 , v cm = v s /2, r l = 600 ? , unless otherwise noted. psrr vs. frequency 20 40 60 80 100 120 1 10 100 1000 frequency (khz) psrr (db) v s = 5v cmrr vs. frequency 20 30 40 50 60 70 80 90 100 110 0.01 0.1 1 10 100 1000 frequency (khz) cmrr (db) v s = 5v small-signal overshoot vs. load capacitance 0 10 20 30 40 50 60 70 1 10 100 1000 10000 load capacitance (pf) small-signal overshoot (%) -os v s = 5v r l = 10k ? t a = 25 g = 1 +os channel separation vs. frequency 80 90 100 110 120 130 140 0.1 1 10 100 1000 frequency (khz) channel separation (db) v s = 5v r l = 620 ? t a = 25 g = 1 cmrr vs. temperature 60 70 80 90 100 110 120 -50-30-101030507090110130 temperature ( ) cmrr (db) v cm = - 0.1v to 5.6v v cm = - 0.1v to 4v v s = 5.5v psrr vs. temperature 60 70 80 90 100 110 120 -50 -30 -10 10 30 50 70 90 110 130 temperature ( ) psrr (db) v s = 2.5v to 5.5v
250 a, 3mhz, rail-to-rail i/o cmos operational amplifiers 6 sgm8621/2/3/4 sg micro corp www.sg-micro.com typical performance characteristics at t a = +25 , v cm = v s /2, r l = 600 ? , unless otherwise noted. open-loop gain vs. temperature 70 80 90 100 110 120 -50 -30 -10 10 30 50 70 90 110 130 temperature ( ) open?loop gain (db) r l = 600 ? r l = 10k ? supply current vs. temperature 150 175 200 225 250 275 300 325 350 -50-30-101030507090110130 temperature ( ) supply current ( a) v s = 5v v s = 3v v s = 2.5v shutdown current vs. temperature 0 30 60 90 120 150 180 210 -50 -30 -10 10 30 50 70 90 110 130 temperature ( ) shutdown current (na) v s = 5v v s = 3v v s = 2.5v output voltage swing vs. output current 0 1 2 3 4 5 0 10203040506070 output current (ma) output voltage (v) 25 r l = 10k ? g = 1
250 a, 3mhz, rail-to-rail i/o cmos operational amplifiers 7 sgm8621/2/3/4 sg micro corp www.sg-micro.com typical performance characteristics at t a = +25 , v cm = v s /2, r l = 600 ? , unless otherwise noted. output impedance vs. frequency 0 20 40 60 80 100 120 140 0.1 1 10 100 1000 10000 frequency (khz) output impedance ( ? ) v s = 2.7v g = 10 g = 1 g = 100 small-signal overshoot vs. load capacitance 0 10 20 30 40 50 60 70 1 10 100 1000 10000 load capacitance (pf) small-signal overshoot (%) -os v s = 2.7v r l = 10k ? t a = +25 g = 1 +os channel separation vs. frequency 80 90 100 110 120 130 140 0.1 1 10 100 1000 frequency (khz) channel separation (db) v s = 2.7v r l = 620 ? t a = +25 g = 1 input voltage noise spectral density vs. frequency 10 100 1000 1 10 100 1000 10000 frequency (hz) voltage noise (nv/ hz) v s = 5v large-signal step response small-signal step response time (100 s/div) time (100 s/div) v s = 2.7v g = +1 c l = 100pf r l = 620 ? v s = 2.7v g = +1 c l = 100pf r l = 620 ? voltage (500mv/div) voltage (50mv/div)
250 a, 3mhz, rail-to-rail i/o cmos operational amplifiers 8 sgm8621/2/3/4 sg micro corp www.sg-micro.com typical performance characteristics at t a = +25 , v cm = v s /2, r l = 600 ? , unless otherwise noted. offset voltage production distribution 0 5 10 15 20 25 30 35 -3 -2.5 -2 -1.5 -1 -0.5 0 0.5 1 1.5 2 2.5 3 offset voltage (mv) percentage of amplifiers (%) typical production distribution of packaged units.
250 a, 3mhz, rail-to-rail i/o cmos operational amplifiers 9 sgm8621/2/3/4 sg micro corp www.sg-micro.com application notes driving capacitive loads the sgm8621/2/3/4 can directly drive 1000pf in unity-gain without oscillation. the unity-gain follower (buffer) is the most sensitive configuration to capacitive loading. direct capacitive loading reduces the phase margin of amplifiers and this results in ringing or even oscillation. applications that require greater capacitive driving capability should use an isolation resistor between the output and the capacitive load like the circuit in figure 1. the isolation resistor r iso and the load capacitor c l form a zero to increase stability. the bigger the r iso resistor value, the more stable v out will be. note that this method results in a loss of ga in accuracy because r iso forms a voltage divider with the r load . v in v out sgm8621 c l r iso figure 1. indirectly driving heavy capacitive load an improved circuit is shown in figure 2. it provides dc accuracy as well as ac stability. r f provides the dc accuracy by connecting the inverting signal with the output. c f and r iso serve to counteract the loss of phase margin by feeding the high frequency component of the output signal back to the amplifier?s inverting input, thereby preserving phase margin in the overall feedback loop. v in v out sgm8621 c l r iso r l r f c f figure 2. indirectly driving heavy capacitive load with dc accuracy for non-buffer configuration, there are two other ways to increase the phase margin: (a) by increasing the amplifier?s gain or (b) by placing a capacitor in parallel with the feedback resistor to counteract the parasitic capacitance associated with inverting node. power-supply bypassing and layout the sgm8621/2/3/4 operate from either a single +2.5v to +5.5v supply or dual 1.25v to 2.75v supplies. for single-supply operation, bypass the power supply +v s with a 0.1f ceramic capacitor which should be placed close to the +v s pin. for dual-supply operation, both the +v s and the -v s supplies should be bypassed to ground with separate 0.1f ceramic capacitors. 2.2f tantalum capacitor can be added for better performance. good pc board layout techniques optimize performance by decreasing the amount of stra y capacitance at the op amp?s inputs and output. to decrease stray capacitance, minimize trace lengths and widths by placing external components as close to the device as possible. use surface-mount components whenever possible. for the operational amplifier, soldering the part to the board directly is strongly recommended. try to keep the high frequency big current loop area small to minimize the emi (electromagnetic interfacing). sgm8621 +v s vn vp -v s v out 10f 0.1f 10f 0.1f sgm8621 vn vp +v s -v s (gnd) v out 10f 0.1f figure 3. amplifier with bypass capacitors grounding a ground plane layer is importa nt for sgm8621/2/3/4 circuit design. the length of the current path speed currents in an inductive ground return will create an unwanted voltage noise. broad ground plane areas will reduce the parasitic inductance. input-to-output coupling to minimize capacitive coupling, the input and output signal traces should not be parallel. this helps reduce unwanted positive feedback.
250 a, 3mhz, rail-to-rail i/o cmos operational amplifiers 10 sgm8621/2/3/4 sg micro corp www.sg-micro.com typical application circuits differential amplifier the circuit shown in figure 4 performs the difference function. if the resistors ratios are equal (r 4 /r 3 = r 2 /r 1 ), then v out = (vp - vn) r 2 /r 1 + v ref . vn vp v out sgm8621 v ref r 1 r 2 r 3 r 4 figure 4. differential amplifier instrumentation amplifier the circuit in figure 5 performs the same function as that in figure 4 but with a high input impedance. vn vp sgm8621 v ref r 1 r 2 r 3 r 4 v out sgm8621 sgm8621 figure 5. instrumentation amplifier low pass active filter the low pass filter shown in figure 6 has a dc gain of (-r 2 /r 1 ) and the -3db corner frequency is 1/2 ? r 2 c. make sure the filter bandwidth is within the bandwidth of the amplifier. the large values of feedback resistors can couple with parasitic capacitance and cause undesired effects such as ringing or oscillation in high-spee d amplifiers. keep resistor values as low as possible and consistent with output loading consideration. v in v out sgm8621 r 1 r 2 r 3 =r 1 //r 2 c figure 6. low pass active filter
250 a, 3mhz, rail-to-rail i/o cmos operational amplifiers 11 sgm8621/2/3/4 sg micro corp www.sg-micro.com package outline dimensions sot-23-5 e e1 e e1 b d a1 a2 a c l 0.2 recommended land pattern (unit: mm) 1.90 2.59 0.99 0.69 0.95 dimensions in millimeters dimensions in inches symbol min max min max a 1.050 1.250 0.041 0.049 a1 0.000 0.100 0.000 0.004 a2 1.050 1.150 0.041 0.045 b 0.300 0.500 0.012 0.020 c 0.100 0.200 0.004 0.008 d 2.820 3.020 0.111 0.119 e 1.500 1.700 0.059 0.067 e1 2.650 2.950 0.104 0.116 e 0.950 bsc 0.037 bsc e1 1.900 bsc 0.075 bsc l 0.300 0.600 0.012 0.024 0 8 0 8
250 a, 3mhz, rail-to-rail i/o cmos operational amplifiers 12 sgm8621/2/3/4 sg micro corp www.sg-micro.com package outline dimensions sc70-5 e e1 e1 e d b a a2 a1 l c 0.20 l1 recommended land pattern (unit: mm) 1.9 0.65 1.3 0.75 0.4 dimensions in millimeters dimensions in inches symbol min max min max a 0.900 1.100 0.035 0.043 a1 0.000 0.100 0.000 0.004 a2 0.900 1.000 0.035 0.039 b 0.150 0.350 0.006 0.014 c 0.080 0.150 0.003 0.006 d 2.000 2.200 0.079 0.087 e 1.150 1.350 0.045 0.053 e1 2.150 2.450 0.085 0.096 e 0.65 typ 0.026 typ e1 1.300 bsc 0.051 bsc l 0.525 ref 0.021 ref l1 0.260 0.460 0.010 0.018 0 8 0 8
250 a, 3mhz, rail-to-rail i/o cmos operational amplifiers 13 sgm8621/2/3/4 sg micro corp www.sg-micro.com package outline dimensions sot-23-6 e e1 e e1 b d a1 a2 a c l 0.2 2.59 0.99 0.95 0.69 recommended land pattern (unit: mm) dimensions in millimeters dimensions in inches symbol min max min max a 1.050 1.250 0.041 0.049 a1 0.000 0.100 0.000 0.004 a2 1.050 1.150 0.041 0.045 b 0.300 0.500 0.012 0.020 c 0.100 0.200 0.004 0.008 d 2.820 3.020 0.111 0.119 e 1.500 1.700 0.059 0.067 e1 2.650 2.950 0.104 0.116 e 0.950 bsc 0.037 bsc e1 1.900 bsc 0.075 bsc l 0.300 0.600 0.012 0.024 0 8 0 8
250 a, 3mhz, rail-to-rail i/o cmos operational amplifiers 14 sgm8621/2/3/4 sg micro corp www.sg-micro.com package outline dimensions soic-8 d e e1 e b a a2 a1 c l 1.27 0.6 2.2 5.2 recommended land pattern (unit: mm) dimensions in millimeters dimensions in inches symbol min max min max a 1.350 1.750 0.053 0.069 a1 0.100 0.250 0.004 0.010 a2 1.350 1.550 0.053 0.061 b 0.330 0.510 0.013 0.020 c 0.170 0.250 0.006 0.010 d 4.700 5.100 0.185 0.200 e 3.800 4.000 0.150 0.157 e1 5.800 6.200 0.228 0.244 e 1.27 bsc 0.050 bsc l 0.400 1.270 0.016 0.050 0 8 0 8
250 a, 3mhz, rail-to-rail i/o cmos operational amplifiers 15 sgm8621/2/3/4 sg micro corp www.sg-micro.com package outline dimensions msop-8 e1 e e d a1 l c a a2 b recommended land pattern (unit: mm) 1.02 0.41 0.65 4.8 dimensions in millimeters dimensions in inches symbol min max min max a 0.820 1.100 0.032 0.043 a1 0.020 0.150 0.001 0.006 a2 0.750 0.950 0.030 0.037 b 0.250 0.380 0.010 0.015 c 0.090 0.230 0.004 0.009 d 2.900 3.100 0.114 0.122 e 2.900 3.100 0.114 0.122 e1 4.750 5.050 0.187 0.199 e 0.650 bsc 0.026 bsc l 0.400 0.800 0.016 0.031 0 6 0 6
250 a, 3mhz, rail-to-rail i/o cmos operational amplifiers 16 sgm8621/2/3/4 sg micro corp www.sg-micro.com package outline dimensions soic-14 dimensions in millimeters dimensions in inches symbol min mod max min mod max a 1.35 1.75 0.053 0.069 a1 0.10 0.25 0.004 0.010 a2 1.25 1.65 0.049 0.065 a3 0.55 0.75 0.022 0.030 b 0.36 0.49 0.014 0.019 d 8.53 8.73 0.336 0.344 e 5.80 6.20 0.228 0.244 e1 3.80 4.00 0.150 0.157 e 1.27 bsc 0.050 bsc l 0.45 0.80 0.018 0.032 l1 1.04 ref 0.040 ref l2 0.25 bsc 0.01 bsc r 0.07 0.003 r1 0.07 0.003 h 0.30 0.50 0.012 0.020 0 8 0 8 recommended land pattern (unit: mm) d e1 e l1 l2 a 3 a a 2 5.2 1.27 0.6 2.2 e b a 1 index 0.80.1 dep 0.20.1 2.00.1 btm e-mark dep 0.10.05 l h h r r1
250 a, 3mhz, rail-to-rail i/o cmos operational amplifiers 17 sgm8621/2/3/4 sg micro corp www.sg-micro.com package outline dimensions tssop-14 e e1 d b a a1 a2 l c h e recommended land pattern (unit: mm) 5.94 0.42 1.78 0.65 dimensions in millimeters dimensions in inches symbol min max min max a 1.100 0.043 a1 0.050 0.150 0.002 0.006 a2 0.800 1.000 0.031 0.039 b 0.190 0.300 0.007 0.012 c 0.090 0.200 0.004 0.008 d 4.900 5.100 0.193 0.201 e 4.300 4.500 0.169 0.177 e1 6.250 6.550 0.246 0.258 e 0.650 bsc 0.026 bsc l 0.500 0.700 0.02 0.028 h 0.25 typ 0.01 typ 1 7 1 7
250 a, 3mhz, rail-to-rail i/o cmos operational amplifiers 18 sgm8621/2/3/4 sg micro corp www.sg-micro.com tape and reel information note: the picture is only for reference. please make the object as the standard. key parameter list of tape and reel package type reel diameter reel width w1 (mm) a0 (mm) b0 (mm) k0 (mm) p0 (mm) p1 (mm) p2 (mm) w (mm) pin1 quadrant sot-23-5 7?? 9.5 3.17 3.23 1.37 4.0 4.0 2.0 8.0 q3 sc70-5 7 9.5 2.25 2.55 1.20 4.0 4.0 2.0 8.0 q3 sot-23-6 7 9.5 3.17 3.23 1.37 4.0 4.0 2.0 8.0 q3 soic-8 13 12.4 6.4 5.4 2.1 4.0 8.0 2.0 12.0 q1 msop-8 13 12.4 5.2 3.3 1.5 4.0 8.0 2.0 12.0 q1 soic-14 13 16.4 6.6 9.3 2.1 4.0 8.0 2.0 16.0 q1 tssop-14 13 12.4 6.95 5.6 1.2 4.0 8.0 2.0 12.0 q1 reel width (w1) reel diameter reel dimensions tape dimensions direction of feed p2 p0 w p1 a0 k0 b0 q1 q2 q4 q3 q3 q4 q2 q1 q3 q4 q2 q1
250 a, 3mhz, rail-to-rail i/o cmos operational amplifiers 19 sgm8621/2/3/4 sg micro corp www.sg-micro.com carton box dimensions note: the picture is only for reference. please make the object as the standard. key parameter list of carton box reel type length (mm) width (mm) height (mm) pizza/carton 7? (option) 368 227 224 8 7? 442 410 224 18 13? 386 280 370 5

▲Up To Search▲

Price & Availability of SGM8621-15

	To Download SGM8621-15 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .